Satellite dish hb-digital 40cm
The satellite dish is easily and quickly assembled and attached to a mast with a diameter of 30-50 mm.
The reflector has an additional scratch-resistant powder coating.
40 cm high performance antenna made of steel, which allows safe television even in bad weather. It is suitable for extreme temperatures from -40° C to +60° C and for wind speeds up to 120 km/h.
Technical data:
- Size: 423 x 423 mm High-performance steel antenna
- Suitable for multi-satellite reception
- HDTV - FUll HD - 3D reception compatible
- up to 36 dB gain
- high wind load (up to 120km/h)
- extremely weatherproof
- from - 40° to + 60
- Rear bracket made of plastic and feed arm made of aluminium -extremely robust and unbreakable -more weatherproof than steel
- Reflector anthracite powder-coated
- Pole mount with 1 threshold (very stable)
- Antenna gain at 10.75 GHz: 34.67 dB
- Antenna gain at 11.75 GHz: 35.15 dB
- Antenna gain at 12.75 GHz: 36.13 dB
- Half-width at 12.75 GHz:<2.9°.
- Cross polarisation decoupling: >27 dB
- Wind load at 72 Km/h: 10.2 Kg
- Wind load at 144 Km/h: 40.8 Kg
- Wind load at 216 Km/h: 91.70 Kg
- Clamp width of the mast clamp: 30 - 50 mm
- Feed bracket diameter: 40 mm
Single LNB hb-digital UHD 101 S Single Black
The HB-DIGITAL UHD 101 S Single LNB is suitable for the reception of analogue as well as digital channels (also HDTV and Premiere) from any satellite. 1 analogue or digital receiver, also mixed, can be connected directly without any further components. No further components or switches are required! The LNB can be connected via DiSEqC switches for multi-feed reception of several satellites. The LNB features a minimal and stable noise figure of 0.1dB, excellent workmanship.
Technical data:
- Model: hb-digital UHD 101 S Single Black
- Noise figure: only 0.1 dB
- Horizontal and vertical polarisation (linear)
- 40 mm feed diameter
- Input frequencies: in the range 10.7 - 12.75 GHz
- 100 % waterproof
- Output frequency range(MHz):950-2150
- Oscillator low/high band(GHz):9.75/10.60
- Oscillator stability(MHz):±3
- Gain(dB):Min.57
- Impedance output(Ω):75
- Switching V/H/Hi/Lo:13/18 VDC/0-22KHz
- Current consumption (mA):Max.240
- Number of outputs:1
- Connectors: F gold plated
Connection cable 110dB with 2 x F-plug gold-plated
Highspeed Sat connection cable for digital HDTV 3D satellite reception with gold-plated plugs and ferrite core sheath current filter against unwanted common-mode signals on coaxial cables, e.g. against humming in audio, against horizontal bars in AV devices or against propagation of high-frequency interference signals in the DVB-C range.
The cable is ideally suited for DVB-S DVB-S2 BK systems for connecting the SAT socket to the receiver or the LNB to the DsieqC or multi-switch.
The cable has 128-plait braiding which already leads to an increase in performance, 100% shielded BZT /CE . >110dB 2x shielding, which makes the cable very flexible and the shielding measure simply exceeds the length of the cable.
Technical data:
- Jacket current filter with 2x ferrite core
- SAT - connection cable with gold-plated plugs at both ends
- HQ Sat connection cable
- 128-plait braiding Gold-plated contacts
- 2x ferrite core sheath current filter BZT /CE
- suitable for HDTV 3D ULTRA HD UHD 4K HD+ Sky
- for DVB-S DVB-S2 BK systems
- Analogue - Digital - HDTV - BK - DVB-T
- Diameter approx. 5mm
- Double shielded
- F - connector at both ends
- 100% shielded BZT /CE
- Attenuation approx. 2dB
- Shielding > 110dB
Scope of delivery:
- 1 x Satellite dish hb-digital 40 cm
- 1 x LNB hb-digital UHD 101S Single black
- 1 x connection cable 5m black
Payment methods
Shipping methods
