Hub (2G) Jeweller
The intelligent hub control panel is a key element of the Ajax security system. The device monitors the operation of all Ajax detectors and immediately sends an alarm signal to the owner and the monitoring station.
- Authentication to prevent spoofing
- Signal jamming detection and encryption of the communication channels
- Tamper alarm
It uses GSM or Ethernet to send alarms to the monitoring station and the owner.
The device sends a notification in the event of a power failure and works for up to 15 hours on the backup battery.
It checks the functionality of the detectors at least every 12 seconds.
Operating principle
The device collects information on detector operation in an encrypted format, analyses the data and, in the event of an alarm, notifies the system owner and the monitoring station in just a few milliseconds.
Features
The device uses Jeweller radio technology to monitor the detectors and ensure a fast response to threats. It switches the entire system over so that the frequencies are cleared in the event of signal jamming. The device is protected against viruses at software level.
Safe automation at home and in the office
Increase the potential of your security system with Ajax scenarios to actively
counteract detected threats and automate your routines. Set up a night-mode arming on a schedule,
switch off all the office lighting automatically by arming the system, program
the outdoor lighting so that intruders are illuminated when they trigger an outdoor motion detector,
or install a sustainable flood-protection system. The system executes scenarios even when
the connection to the Ajax Cloud server is interrupted.
Installation and setup
Ready to use immediately. Setup is done via the mobile app, and the detectors are connected with a single click. With the SmartBracket holder, the hub can be mounted in just a few minutes.
Technical data
| Classification | Wireless control panel with GSM and Ethernet modules |
| Maximum number of devices connected to the hub | 100 |
| Maximum number of cameras connected to the hub | 10 |
| Maximum number of users | 50 |
| Maximum number of rooms | 50 |
| Maximum number of groups | 9 |
| Number of scenarios | 5 |
| Mobile apps available for | iOS 9.1 and higher Android 4.1 and higher |
| Communication channels | Ethernet, GSM (850/900/1800/1900 MHz) |
| Alarm signal | Delivery time: 0.15 sec. Types of notifications: SMS message, call, push notification |
| Communication with the monitoring station | Contact ID, SIA |
| Processor | ARM |
| Operating system | OS Malevich |
| Power supply | Mains supply: 110–240 V Backup battery: Li-Ion 2 h up to 15 hours of offline operation with Ethernet switched off |
| SIM card support | Micro-SIM 2G |
| Operating temperature range | +5 °C to +40 °C |
| Tamper protection | Protection against tampering Signal jamming detection tamper-proof |
| Video surveillance | up to 10 cameras or DVRs |
| Remote setup | yes |
| Dimensions | 163 x 163 x 36 mm |
| Weight | 350 g |
| Certification | Class 2 (CE) |
| Warranty | Replacement and repair within 24 months of the date of purchase. Batteries are not covered by the warranty. |
| Complete set | Ajax hub (2G) – intelligent control panel Power cable Ethernet cable Mounting kit SIM card (region-dependent) User manual |
Questions about delivery?
Tel: +49 (0) 211 54 555 777
Ajax Systems Germany GmbH, Am Potsdamer Platz 10, 10785 Berlin, Berlin, Deutschland, support@ajax.systems, https://www.ajax.systems
