Fuba DSP 096 Telescopic Roof Rafter Mount with Ø60mm Mast Tube – for Larger Mast Clamps
The Fuba DSP 096 is a high-quality hot-dip galvanised telescopic roof rafter mount for installing satellite dishes and terrestrial antennas on pitched roofs. It is screwed directly onto the rafters or the battens from the outside – mounting on the upper as well as on the lower side of the rafter is possible. The mount is designed for satellite dishes up to 100cm in diameter and withstands a bending moment of 700Nm.
The extendable telescopic tube adapts flexibly to rafter spacings of 520...850mm, so that a single mount fits almost every common roof construction. The inclination is infinitely adjustable for any roof pitch from 0...90 degrees, limited only by the cover plate. Calibrated tubes ensure clean, horizontal guidance of the inner and outer tube.
The mast tube measures 900mm at Ø60mm with a wall thickness of 3.5mm. The larger tube diameter allows mounting antennas with a wider mast clamp span that do not fit a Ø48mm tube. Tube-encircling weld seams and self-locking nuts on the U-profiles secure the construction permanently, while the high-quality hot-dip galvanisation protects against corrosion in continuous outdoor use. A grounding screw and mast cap are already included.
Technical Specifications
| Product type | Telescopic roof rafter mount |
| Manufacturer | Fuba |
| Tube length | 900mm |
| Tube diameter (mast tube) | Ø60mm |
| Tube wall thickness | 3.5mm |
| Max. rafter spacing | 520...850mm |
| For antennas up to | Ø100cm |
| Roof pitch angle | 0...90 degrees, infinitely adjustable |
| Bending moment | 700Nm |
| Surface | Hot-dip galvanised |
| Mounting type | Directly onto rafters or battens, upper and lower side possible |
| Adjustment | Extendable telescopic tube |
| Workmanship | Tube-encircling weld seams, calibrated tubes, self-locking nuts on the U-profiles |
| Grounding | Grounding screw included |
| Mast cap | Included in delivery |
| Suitable for | Pitched roofs |
Applications
| Installing satellite dishes up to 100cm in diameter on pitched roofs of single- and multi-family homes |
| Mounting terrestrial antennas for DVB-T2 or FM radio on the roof |
| Retrofitting existing roof installations – the telescopic tube covers rafter spacings of 520...850mm without additional parts |
| Mounting antennas with a large mast clamp span thanks to the Ø60mm mast tube |
Scope of Delivery
| 1 x Fuba DSP 096 telescopic roof rafter mount, hot-dip galvanised |
| 1 x mast cap |
| 1 x grounding screw |
| Mounting hardware for fixing to the rafter |
Questions about delivery?
Tel: +49 (0) 211 54 555 777
Fuba Vertriebs-GmbH, Höltenweg 101, 48155 Münster, Nordrhein-Westfalen, Deutschland, info@fuba.de
