Cable connector waterproof IP68 for power cable Cable connector 1.0 mm² / 2.5 mm²

SKU: 6503

GTIN: 4063328044053

Category: Electrical mounting accessories

2,90 €

incl. 19% VAT plus

Cable gauge

1,0 mm²

2,5 mm²

Do you want to order multiple variants at once?

Available immediately

Power cable connector IP68
Cable connector for 3 cable connections max. 3 x 0.5 - 1.0 mm² or 3 x 0.5 - 2.5 mm²
Degree of protection IP68 , dust- & waterproof
Material: plastic / nylon

More product details

Our IP68 cable connector is made from high quality nylon which means it will not break or fade in sunlight and will last you for years. It is dustproof and waterproof.
The cable connector meets all quality standards and is particularly easy to plug in.

Technical data:

Cable connector with screw connection IP68
for 3 cable connections max. 3 x 0.5 - 1.0 mm² or 3 x 0.5 - 2.5 mm²
Material housing: nylon
Material connector: copper
Current: 13.5A or 24A
Voltage: 450VAC
Protection: Rubber seal
Degree of protection = IP68: dust & waterproof
Wiring inserts: 2P/3P
Max. Operating temperature: 105 °C
Single wire: 0.5 - 1.0mm² (3-pole) or 3 x 0.5 - 2.5 mm² (3-pole)
Waterproof test: depth 20 metres & operation 150 hours

Certification

DEKRA Certification (35-120214 REV.1): EN 60998-1:2004, EN 60998-2-1:2004 - (25.05.2022)
ENEC Certification (35-117084 REV.2): Confirms compliance with European safety standards for electrical equipment EN 60998-1:2004, EN 60998-2-1:2004 - (09.03.2023)
CB Certificate (NL-80990): International recognition of safety standards IEC 60998-1:2002, IEC 60998-2-1:2002 - (26.05.2022)
NSW Certification (CS11131/1): Complies with Australian electrical safety regulations - (21.03.2023)
ETL Certification (4006328): Confirms compliance with UL 2238:2011 Ed.2+R:13Dec2013 and CSA C22.2#182.3:2016 Ed.2 for cable and connector assemblies - (09.07.2020)
UKCA Compliance (4385226.02AOC): Complies with UK electrical safety regulations - (26.05.2022)

Connection instructions (wiring steps):

Open the outer and inner covers on both sides and take out the connector
Pull the stripped cable through the covers on both sides
Place the stripped conductors in the connector and screw the wires tight. (Important: place conductors of the same colour opposite each other!)
Tighten the inner and outer covers to the connector on both sides
Screw the inner and outer covers tightly back together. Done!

Scope of delivery: