Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can easily withstand strong wind and heavy rain, and its very good quality provides excellent satellite reception with a unique bad weather reserve.
The reflector diameter is 65, 78 or 85 centimeters and the support arm is equipped with a special LNB mount made of sturdy cast aluminum. All cables can be routed protected by the feed lever. On the back of the SAT antenna is a built-in mounting compartment that can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
DAA 650 - 65cm
- Reflector diameter: 600 x 650 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 35.20 dB...36.70 dB
- Half-width at 12.75 GHz: < 2.7°.
- Cross-polarization decoupling: ≥ 27 dB
- Offset angle: 22.1°
- Wind load at max. 20 m/s: 14.2 kg
- Wind load at max. 40 m/s: 52.4 kg
- Wind load at max. 60 m/s: 119.3 kg
- Elevation adjustment: 0°...73° (0°...41° for foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: aluminum
- Reflector material thickness: 0.8 mm
- Antenna back: Galvanized steel with plastic connections
- Screw sets: Stainless steel
- color of the back: gray, independent of the reflector color
- Feed holder: 40 mm
- LNB holder: die-cast aluminum
- Weight: 5,28 kg
DAA 780 - 78cm
- Reflector diameter: 740 x 840 mm
- Frequency range: 10,75 GHz...12,75 GHz
- Gain: 36.80 dB...38.50 dB
- Half-width at 12.75 GHz: < 2.2°.
- Cross-polarization decoupling: ≥ 27 dB
- Offset angle: 25°
- Wind load at max. 20 m/s: 17.4 kg
- Wind load at max. 40 m/s: 69.4 kg
- Wind load at max. 60 m/s: 156.2 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range mast clamp: 26...75 mm
- Reflector material: aluminum
- Reflector material thickness: 1.0 mm
- antenna back: galvanized steel with plastic connections
- Screw sets: Stainless steel
- color of the back: gray, independent of the reflector color
- Feed mount: 40 mm
- LNB holder: die-cast aluminum
- Weight: 7,95 kg
DAA 850 - 85cm
- Reflector diameter: 850 x 850 mm
- Frequency range: 10,75 GHz...12,75 GHz
- Gain: 38.12 dB...39.53 dB
- Half-width at 12.75 GHz: < 2.2°.
- Cross-polarization decoupling: ≥ 27 dB
- Offset angle: 21.5°
- Wind load at max. 20 m/s: 21.3 kg
- Wind load at max. 40 m/s: 85.4 kg
- Wind load at max. 60 m/s: 192.1 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range mast clamp: 26...75 mm
- Reflector material: aluminum
- reflector material thickness: 1.1 mm
- Antenna back: Galvanized steel with plastic connections
- Screw sets: Stainless steel
- color of the back: gray, independent of the reflector color
- Feed mount: 40 mm
- LNB holder: die-cast aluminum
- Weight: 8,88 kg
Scope of delivery:
- 1 x Satellite dish Fuba DAA 650 / 780 / 850 (color and size to choose from).
- 1 x arm
- 1 x LNB bracket
* The pictured mounting tube is not included in delivery
Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can easily withstand strong wind and heavy rain, and its very good quality provides excellent satellite reception with a unique bad weather reserve.
The reflector diameter is 65, 78 or 85 centimeters and the support arm is equipped with a special LNB mount made of sturdy cast aluminum. All cables can be routed protected by the feed lever. On the back of the SAT antenna is a built-in mounting compartment that can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
DAA 650 - 65cm
- Reflector diameter: 600 x 650 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 35.20 dB...36.70 dB
- Half-width at 12.75 GHz: < 2.7°.
- Cross-polarization decoupling: ≥ 27 dB
- Offset angle: 22.1°
- Wind load at max. 20 m/s: 14.2 kg
- Wind load at max. 40 m/s: 52.4 kg
- Wind load at max. 60 m/s: 119.3 kg
- Elevation adjustment: 0°...73° (0°...41° for foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: aluminum
- Reflector material thickness: 0.8 mm
- Antenna back: Galvanized steel with plastic connections
- Screw sets: Stainless steel
- color of the back: gray, independent of the reflector color
- Feed holder: 40 mm
- LNB holder: die-cast aluminum
- Weight: 5,28 kg
DAA 780 - 78cm
- Reflector diameter: 740 x 840 mm
- Frequency range: 10,75 GHz...12,75 GHz
- Gain: 36.80 dB...38.50 dB
- Half-width at 12.75 GHz: < 2.2°.
- Cross-polarization decoupling: ≥ 27 dB
- Offset angle: 25°
- Wind load at max. 20 m/s: 17.4 kg
- Wind load at max. 40 m/s: 69.4 kg
- Wind load at max. 60 m/s: 156.2 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range mast clamp: 26...75 mm
- Reflector material: aluminum
- Reflector material thickness: 1.0 mm
- antenna back: galvanized steel with plastic connections
- Screw sets: Stainless steel
- color of the back: gray, independent of the reflector color
- Feed mount: 40 mm
- LNB holder: die-cast aluminum
- Weight: 7,95 kg
DAA 850 - 85cm
- Reflector diameter: 850 x 850 mm
- Frequency range: 10,75 GHz...12,75 GHz
- Gain: 38.12 dB...39.53 dB
- Half-width at 12.75 GHz: < 2.2°.
- Cross-polarization decoupling: ≥ 27 dB
- Offset angle: 21.5°
- Wind load at max. 20 m/s: 21.3 kg
- Wind load at max. 40 m/s: 85.4 kg
- Wind load at max. 60 m/s: 192.1 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range mast clamp: 26...75 mm
- Reflector material: aluminum
- reflector material thickness: 1.1 mm
- Antenna back: Galvanized steel with plastic connections
- Screw sets: Stainless steel
- color of the back: gray, independent of the reflector color
- Feed mount: 40 mm
- LNB holder: die-cast aluminum
- Weight: 8,88 kg
Scope of delivery:
- 1 x Satellite dish Fuba DAA 650 / 780 / 850 (color and size to choose from).
- 1 x arm
- 1 x LNB bracket
* The pictured mounting tube is not included in delivery