Wiring Bridge Set (H07V-K) 500mm 10mm² & Ferrules, 8,70 €

Wiring Jumper Set (H07V-K) 10mm² – 3 Colors with Wire-End Ferrules

General Information: The H07V-K 10mm² Wiring Jumper Set consists of three flexible cables in black, blue, and yellow/green with pre-assembled wire-end ferrules. The cables are based on the H07V-K single-core cable with class 5 fine-stranded copper conductor and are designed for fixed electrical installations in indoor areas.

Function: The 10mm² wiring jumper set is used for clean and secure wiring in switchgear and control devices, distribution boards, and closed electrical systems. Thanks to the flexible design, the cables are easy to process even in tight spaces.

Application: Suitable for installations in electrical conduits, blank pipes, cable ducts, and for protected fixed installation in devices and systems. The set is ideal for typical device leads and internal wiring with medium currents.

Material: The cables consist of bare, fine-stranded copper conductors (Class 5) according to DIN VDE 0295 / IEC 60228 with PVC insulation type TI1 according to DIN EN 50363-3. The core leads are silicone- and cadmium-free as well as free from substances that interfere with paint wetting.

Technology: The H07V-K 10mm² set has a rated voltage of 450/750 V AC and a test voltage of 2500 V. Temperature range (moving): +5 °C to +70 °C, (fixed): -30 °C to +80 °C. The cables are flame-retardant according to DIN VDE 0482-332-1-2 / EN 60332-1-2. The conductor design corresponds to Class 5 according to IEC 60228.

Conclusion: The H07V-K 10mm² Wiring Jumper Set is a practical solution for structured electrical installations with flexible copper cables and pre-assembled wire-end ferrules. The combination of black, blue, and yellow/green allows for clear wiring in distribution boards and control cabinets.

Technical Data

Cable Type:	H07V-K Single Core Cable
Version:	Wiring Jumper Set, 3 Colors (Black, Blue, Yellow/Green)
Cross-section:	10 mm²
Conductor:	Copper, bare, fine-stranded
Conductor Class:	Class 5 according to DIN VDE 0295 / IEC 60228
Conductor Diameter:	4.0 mm
Insulation Thickness:	1.0 mm
Outer Diameter:	6.0 mm
Cable Weight:	111 kg/km
Max. Elec. Resistance at 20°C:	1.91 Ohm/km
Current Carrying Capacity at 30°C:	50 A
Current Carrying Capacity at 50°C:	36 A
Insulation:	PVC Type TI1 according to DIN EN 50363-3
Rated Voltage:	AC Uo/U 450/750 V
Test Voltage:	2500 V
Insulation Resistance:	> 20 MOhm x km
Temp. Range (fixed installation):	-30°C to +80°C
Temp. Range (moving):	+5°C to +70°C
Bending Radius:	4 x outer diameter
Fire Behavior:	Flame-retardant according to DIN VDE 0482-332-1-2 / EN 60332-1-2
Standards and Marking:	DIN VDE 0281-3, EN 50525-2-31, IEC 60227-3, EN 50575:2014 + A1:2016, HAR, CE, EAC, UKCA, RoHS compliant

Scope of Delivery

1 x Wiring Jumper Set (H07V-K) 500mm 10mm² with Wire-End Ferrules

FAQ

When is a wiring jumper set with wire-end ferrules useful?

When connections in a control cabinet or distribution board need to be prepared quickly, neatly, and without manual cutting.

How do I choose the correct cross-section for a wiring jumper set with wire-end ferrules?

The cross-section depends on the current load, terminal, and application. It must match the existing installation.

What length should a wiring jumper set with wire-end ferrules have?

The length should match the distance between the terminals so that the jumper can be installed without tension and without unnecessary loops.

What are the colors used for in a wiring jumper set with wire-end ferrules?

Colors help in identifying the conductors and make the wiring in the distribution board clearer.

Product type:

Electrical mounting accessories, Aderleitung H07V-K

Questions about delivery?

You can reach our customer service at:
Tel: +49 (0) 211 54 555 777

To the contact form

Product not found? Request an item

500mm Wiring Bridge Set 10mm² (H07V-K) - 3 Colors Black Blue Yellow/Green - with Ferrules