For outdoor installation it is recommended to use a special cable for solar panels. Unlike conventional cables, solar panel cable has a special double-layer insulation, which protects its copper conductors from all types of environmental influences (rain, snow, UV radiation, temperature fluctuations).
Using this cable prevents possible problems during the operation of solar panels.
The cross-section of the cable should be chosen according to its length and the capacity of the solar panels, in order to minimise losses.
Technical data:
- Outer Ø: 6.40 mm (±0.2 mm).
- CU weight kg/100m: 4.61 kg
- Conductor material: Copper, tinned
- Cable type: H1Z2Z2-K
- Conductor class: Class 5
- Conductor insulation material: XLPE
- Outer sheath material: XLPE
- sheath color: black and black
- Value voltage [V]: DC 1500V
- Rated voltage Uo min/max [V]: AC 600V/1000V
- Max. Permitted operating voltage [V]: DC 1800V
- Test voltage [V]: AC 6.5kV 50Hz (5min).
- Min. insulation resistance AT 20°C: 499 MΩ-km
- Min. insulation resistance AT 90°C: 0.499 MΩ-km
- Max. Conductor resistance at 20°C: 3.39 MΩ/km
- Bending radius [xØ]: 6 x Ø
- Operating temp. fixed min/max [C]: -40°C to +90°C
- temperature at conductor: max. 120 °C
- short circuit temperature: 250 °C 5s
- ambient temperature: 60 °C
Electrical performance:
- Elongation of insulation/sheath: 125%↑ according to EN 60811-1-1.
- Tensile strength of insulation/jacket: 8.0Mp↑ according to EN 60811-1-1
- Shrinkage resistance: ≤2% according to EN 60811-503.
- Acid and alkali resistance: EN 60811-2-1.
- Ozone resistant: EN50396-8.1.3
- UV resistant: EN 50289-4-17
- Low temperature impact resistance (-40℃,5h): EN 60811-1-4
- Fire behavior: IEC60332-1-2
- Cland Br content: EN 50618
- Testing of thermal resistance: EN60216-1, EN60216-2, TI120
Scope of delivery:
- 1 x 100m solar cable 6 mm² red
For outdoor installation it is recommended to use a special cable for solar panels. Unlike conventional cables, solar panel cable has a special double-layer insulation, which protects its copper conductors from all types of environmental influences (rain, snow, UV radiation, temperature fluctuations).
Using this cable prevents possible problems during the operation of solar panels.
The cross-section of the cable should be chosen according to its length and the capacity of the solar panels, in order to minimise losses.
Technical data:
- Outer Ø: 6.40 mm (±0.2 mm).
- CU weight kg/100m: 4.61 kg
- Conductor material: Copper, tinned
- Cable type: H1Z2Z2-K
- Conductor class: Class 5
- Conductor insulation material: XLPE
- Outer sheath material: XLPE
- sheath color: black and black
- Value voltage [V]: DC 1500V
- Rated voltage Uo min/max [V]: AC 600V/1000V
- Max. Permitted operating voltage [V]: DC 1800V
- Test voltage [V]: AC 6.5kV 50Hz (5min).
- Min. insulation resistance AT 20°C: 499 MΩ-km
- Min. insulation resistance AT 90°C: 0.499 MΩ-km
- Max. Conductor resistance at 20°C: 3.39 MΩ/km
- Bending radius [xØ]: 6 x Ø
- Operating temp. fixed min/max [C]: -40°C to +90°C
- temperature at conductor: max. 120 °C
- short circuit temperature: 250 °C 5s
- ambient temperature: 60 °C
Electrical performance:
- Elongation of insulation/sheath: 125%↑ according to EN 60811-1-1.
- Tensile strength of insulation/jacket: 8.0Mp↑ according to EN 60811-1-1
- Shrinkage resistance: ≤2% according to EN 60811-503.
- Acid and alkali resistance: EN 60811-2-1.
- Ozone resistant: EN50396-8.1.3
- UV resistant: EN 50289-4-17
- Low temperature impact resistance (-40℃,5h): EN 60811-1-4
- Fire behavior: IEC60332-1-2
- Cland Br content: EN 50618
- Testing of thermal resistance: EN60216-1, EN60216-2, TI120
Scope of delivery:
- 1 x 100m solar cable 6 mm² red