This connector is designed for on-site use to connect or extend network installation cables. The metal housing ensures a durable, stable connection, against oxidation, corrosion and to prevent interference. This connector is the first choice when the cable length is insufficient and therefore needs to be extended. The tool-less design allows quick installation in about 2 minutes without special crimping tools. The screwable metal sleeve is also convenient to remove. Repeating the installation is also easy.
Technical data:
Application
- Available in CAT.7, fully shielded
- Shielding: STP
- Performance complies with ANSI/TIA/EIA 568C.2-1, ISO/IEC 11801, EN 50173
- Supports PoE/PoE+/4PPoE (IEEE 802.3af, 3at, 3b) 100 watts
- Category CAT 7 10G, 600MHz
- Built-in PCB, for excellent connection and stable transmission
- Cable installation via IDC strips, colour-coded according to EIA/TIA 568 A & B
- Cable fixation by screwable metal sleeve
- Easy to assemble, tool-free construction, no crimping tool required
- Available for repeated use, especially suitable for DIY connection with LAN cables
- Functional parts pass reliability test according to TIA standards
Construction
- Housing: Fully shielded, zinc alloy die-cast with nickel plating.
- PCB material: FR-4, UL 94V-0
- IDC terminal: Phosphor bronze with tin plating
- Cap: PC, UL 94V-2, printed with 568A&B colour codes
- Attached pins: 8 (1:1)
- Suitable cable diameter: 5.5 - 8 mm
- Suitable conductor thickness with insulation: 1.35 to 1.5 mm
- Complies with AWG standards: AWG22 AWG23 AWG24
- Special features: with 2 fixing eyelets for fixing
- Operating temperature: -10°C to +60°C (ISO/IEC 11801, ANSI/TIA 568C.2)
- Storage temperature: -40°C to +60°C
- Contact resistance: 20M OHM
- Isolation resistance: not more than 500M OHM @ 100? DC
- Resistive voltage: DC 1000V, AC 700V, RMS 60HZ MIN.
- IDC terminal life: >200 according to ISO/IEC 11801, IEC 60603-7-5
Scope of delivery:
- 1 x LSA CAT 7 connector
This connector is designed for on-site use to connect or extend network installation cables. The metal housing ensures a durable, stable connection, against oxidation, corrosion and to prevent interference. This connector is the first choice when the cable length is insufficient and therefore needs to be extended. The tool-less design allows quick installation in about 2 minutes without special crimping tools. The screwable metal sleeve is also convenient to remove. Repeating the installation is also easy.
Technical data:
Application
- Available in CAT.7, fully shielded
- Shielding: STP
- Performance complies with ANSI/TIA/EIA 568C.2-1, ISO/IEC 11801, EN 50173
- Supports PoE/PoE+/4PPoE (IEEE 802.3af, 3at, 3b) 100 watts
- Category CAT 7 10G, 600MHz
- Built-in PCB, for excellent connection and stable transmission
- Cable installation via IDC strips, colour-coded according to EIA/TIA 568 A & B
- Cable fixation by screwable metal sleeve
- Easy to assemble, tool-free construction, no crimping tool required
- Available for repeated use, especially suitable for DIY connection with LAN cables
- Functional parts pass reliability test according to TIA standards
Construction
- Housing: Fully shielded, zinc alloy die-cast with nickel plating.
- PCB material: FR-4, UL 94V-0
- IDC terminal: Phosphor bronze with tin plating
- Cap: PC, UL 94V-2, printed with 568A&B colour codes
- Attached pins: 8 (1:1)
- Suitable cable diameter: 5.5 - 8 mm
- Suitable conductor thickness with insulation: 1.35 to 1.5 mm
- Complies with AWG standards: AWG22 AWG23 AWG24
- Special features: with 2 fixing eyelets for fixing
- Operating temperature: -10°C to +60°C (ISO/IEC 11801, ANSI/TIA 568C.2)
- Storage temperature: -40°C to +60°C
- Contact resistance: 20M OHM
- Isolation resistance: not more than 500M OHM @ 100? DC
- Resistive voltage: DC 1000V, AC 700V, RMS 60HZ MIN.
- IDC terminal life: >200 according to ISO/IEC 11801, IEC 60603-7-5
Scope of delivery:
- 1 x LSA CAT 7 connector