Solar Connector Distributor Type-Y 2-fold Solar Cable Connector for Photovoltaic

A solar plug distributor Y-type is a device that allows you to separate Solar plugs that are connected together without having to break wires or use tools.

Y-type distributors have two connectors - one at one end and one at the other. You can insert the paired Solar connectors into the corresponding connectors to disconnect. This is useful, for example, when you need to maintain or replace solar modules and want to disconnect them temporarily from the system.

Solar plug distributors enable safe and convenient connection and disconnection of solar modules and other devices

Technical data:

Plug:

• 2-fold distributor Y type male / female for solar panel:
• Socket to plug (F / M / M) and plug to socket (M / F / F).
• Insulation material: PPO
• Contact material: copper, tinned
• Voltage: 1500V
• Rated current: 35A
• Temperature range: -40 ° C to + 80 ° C
• Protection class: IP67
• Contact resistance: 0.5 mΩ
• Fire protection class: UL94-VO
• Pin Ø 4mm
• Colour: Black

Cable:

• Outer Ø: 5.60 mm (±0.2 mm)
• CU Weight kg/100m: 3.09 kg
• Cable cross-section: 4mm²
• Conductor material: Copper, tinned
• Cable type: H1Z2Z2-K
• Length: 35 cm
• Conductor class: Class 5
• Core insulation material: XLPE
• Outer sheath material: XLPE
• Sheath colour: black
• Rated voltage U [V] DC 1500V
• Rated voltage Uo min/max [V]: AC 600V/1000V
• Max. Permissible operating voltage [V]: DC 1800V
• Test voltage [V]: AC 6.5kV 50Hz (5min).
• Min. insulation resistance AT 20°C: 579 MΩ-km
• Min. insulation resistance AT 90°C: 0.579 MΩ-km
• Max. Conductor resistance at 20°C: 5.09 MΩ/km
• Bending radius [xØ]: 6 x Ø
• Operating temp. fixed min/max [C]: -40 °C to +90°C
• Temperature at conductor : max. 120 °C
• Short-circuit temperature: 250 °C 5s
• Ambient temperature: 60 °C

Electrical performance:

• Elongation of insulation/sheath: 125%↑ according to EN 60811-1-1.
• Tensile strength of insulation/jacket: 8.0Mp↑ according to EN 60811-1-1
• Shrinkage resistance: ≤2% according to EN 60811-503
• Acid and alkali resistance: EN 60811-2-1
• Ozone resistant: EN50396-8.1.3
• UV-resistant: EN 50289-4-17
• Low temperature impact resistance (-40?,5h): EN 60811-1-4
• Fire behaviour: IEC60332-1-2
• Cland Br content: EN 50618
• Thermal resistance test: EN60216-1,EN60216-2, TI120.

Scope of delivery:

• 1 x Solar plug distributor Y-type 2-fold
• 1 x Solar socket distributor Y-type 2-fold