Wiring Bridge H07V-K – 6mm² for Heavy-Duty Wiring with More Reserve
General Information: This wiring bridge H07V-K 6mm² is a flexible single core wire designed for clean and reliable connections in control cabinets, distribution boxes, switch boxes, or devices. The larger cross-section is particularly suitable when more reserve is desired for wiring – for example, with stronger outgoing lines, resilient bridges, and terminal rows with a higher continuous load.
Function: The wiring bridge reliably connects terminals, outgoing lines, or electrical components with each other. Thanks to the fine-wired copper strand, the wire remains flexible and can be cleanly routed even in tight spaces. The pre-assembled wire end ferrules facilitate connection in matching terminals and ensure fast, repeatable installation.
Application: The wire is suitable for protected installation in electrical conduits, surface-mounted or flush-mounted, as well as in similar enclosed systems. Typical areas of application include distributors, switchboxes, lighting systems, as well as switching and control devices. The wire is not suitable for direct installation on cable trays or cable ladders, except for equipotential bonding.
Material: The conductor consists of bare, fine-wired copper strand of conductor class 5. This keeps the wiring bridge easy to work with and flexible despite the larger cross-section. The insulation consists of robust PVC insulation TI1 and is designed for typical use in protected setups. The wire end ferrules are green and have a length of 12mm.
Technical Data: The wiring bridge has a cross-section of 6mm². The nominal voltage is 450/750V AC, and the test voltage is 2500V. The outer Ø is between 4.4–5.3mm. The wire is flame-retardant according to EN 60332-1-2. The temperature range is +5 to +70 °C when flexible and -30 to +80 °C when fixed. The copper weight is 58kg/km.
Conclusion: A solid H07V-K wiring bridge for professional wiring when more thermal reserve, stable voltage routing, and a reliable connection are essential. Particularly suitable for stronger outgoing lines, heavy-duty bridges, and clean connections in distributors, terminal rows, and switching devices.
Technical Data
Scope of Delivery
FAQ
Why are wire end ferrules pre-assembled on the wiring bridge (H07V-K)?
- The pre-assembled wire end ferrules protect the fine-wired copper strand when connecting to terminals. This ensures the wire is neatly guided, improves the contact surface, and makes installation faster and reproducible.
Is a wiring bridge (H07V-K) flexible?
- Yes, H07V-K is a flexible, fine-wired copper wire of class 5. This makes it easier to install in switching and distribution areas than rigid conductors.
Can a wiring bridge (H07V-K) be laid directly on cable trays or cable ladders?
- No, it is generally not intended for direct installation on cable trays or cable ladders. An exception may be equipotential bonding. For the specific installation, the valid standards and assembly conditions must be observed.
In which areas can a wiring bridge (H07V-K) be used?
- It is suitable for protected fixed installation in devices, systems, conduits, surface-mounted or flush-mounted, as well as in similar enclosed systems.
Does a wiring bridge (H07V-K) still need to be stripped or crimped?
- No, with a version featuring pre-assembled wire end ferrules, the ends are already prepared. The wire can be inserted directly into suitable terminals.
Questions about delivery?
Tel: +49 (0) 211 54 555 777
HB-DIGITAL GmbH, Wahlerstraße 16, 40472 Düsseldorf, Deutschland, info@hb-digital.de, https://www.hb-digital.de
