25m - 500m Network cable CAT 7 Outdoor LAN data cable max. 1000 MHz S/FTP PE AWG23 black

The high-quality network cable outdoor or installation cable is used for the construction of high-speed networks of Gigabit Ethernet. Such a cable can support speeds of up to 10 Gbps. It is also backward compatible with CAT.6a, CAT.6, CAT.5e and CAT.5 categories.

Installation options: optimised for high transmission speeds of up to 10 Gigabit/s and numerous applications in the private and industrial sectors.

Range of use: IEEE 802.3, WLAN Wi-Fi network, 10/100/1000Base-T, 10GBase-T, PoE, PoE+, PoE++

Installation note: rigid installation cable for LSA connections - the pairs should not be very close together in a row (as with most crimp connectors). For maximum performance, we advise using the compatible LSA RJ45 plugs, keystone or connectors.

Technical data:

• Cable category: CAT.7 Outdoor
• Core inner conductor material: pure copper (4x2 cores)
• Inner conductor diameter: Ø 0.56 mm (AWG23)
• Conductor construction: twisted pair, 4 core pairs
• Pair colours: green + white; brown + white; orange + white; blue + white
• *the second cable in the pair is plain white - this is typical for installation cables
• Shielding: S/FTP PiMF (double shielded): Aluminium foil with plastic sheathing (pair) 100% coverage > Shielding Braiding of aluminium wires 26% coverage
• Outer sheath diameter: Ø 7.2 mm
• Outer sheath material: PE, UV-resistant, weather- and moisture-proof

Temperature range:

• Installation -20°C ... +60°C
• in operation 0°C ... +50°C
• Storage -15°C ... +50°C

Bending radius:

• during installation min. 4 x D
• when installed min. 8 x D

• Transmission speeds: up to 10 Gbit/s 10000MBit/s
• Data frequency rate: max. up to 1000 MHz
• Impedance: @100MHz - 100 ±5Ω Ohm
• Coupling attenuation: 85 dB
• Operating voltage: 125 V
• Crush resistance: min. 1000 N/10cm
• DC resistance: max. 76 Ohm/km
• Resistance unbalance: max. 2%
• Insulation resistance: min. 5000MΩ x km
• Mutual capacitance: nom. 43 pF/m
• Capacitance unbalance: max. 1600 pF/km
• Propagation delay: max. 430 ns/100m
• Delay skew: max. 25 ns/100m
• Testing voltage: 1000 V
• NVP value: 78-80%

Connection:

• Connection A: Network raw cable (without plug)
• Connection B: Network raw cable (without plug)

*the matching LSA connector can be ordered separately from us

Standards:

• ISO IEC 11801 2nd ed
• ISO IEC 61156-5
• EN 50173-1
• EN 50290-2-24
• EN 50290-2-23
• LVD Low Voltage Directive 2014/35/EC
• RoHS EC Directive 2015/863/EU

Scope of delivery:

• 1 x network cable CAT 7 outdoor black (RAL 9011)