network cable CAT 8 duplex max. 2000 MHz S/FTP AWG22 LSZH blue by the , 3,10 €

The high quality DUPLEX network or installation cable is used for building high-speed networks of Gigabit Ethernet. Such a cable can support speeds of up to 40 Gbps. It is also backward compatible with CAT.7, CAT.6a, CAT.6, CAT.5e and CAT.5 categories.

Range of use: compatible with IEEE 802.3, WLAN network, 10/100/1000Base-T, 10GBase-T, PoE, PoE+, PoE++

Installation options: optimized for high transmission speeds up to 40 Gigabit/s and numerous applications in residential and industrial environments.

Installation note: rigid installation cable for LSA connections - pairs should not be very close in a row (as with most crimp connectors). For maximum performance, we advise using the compatible LSA RJ45 plugs, keystone or connectors.

Technical data:

Transmission properties

Cable category: CAT 8
Maximum frequency: 2000 MHz
Shielding: S/FTP

Cable construction

Cable form: duplex
Conductor: Pure copper AWG22 (Ø 0.624 mm)
Insulation: Foamed PE, colors according to IEC 60189-2
Wire pairs: Two insulated conductors twisted together, 4 pairs in total
Pair shielding: Aluminum/Polyester foil
Overall shielding: Tinned copper braid
Outer sheath: LSZH according to EN 50290-2-27
Outer diameter: approx. 15,80 x 7.90 mm

Electrical properties

DC resistance: ≤ 65 Ω/km
DC resistance unbalance: ≤ 2%
Insulation resistance: ≥ 5000 MΩxkm
Capacitance: 43 nF/km
Capacitance unbalance: ≤ 1200 pF/km
Operating voltage: 72 V DC
Impedance: 100 ± 5 Ω @ 100 MHz
NVP: 78%

Test voltage:

1.0 kV DC (conductor/conductor), 0.7 V AC (conductor/shield) for 1 min;
2.5 kV DC (conductor/conductor), 1.7 V AC (conductor/shield) for 2 s

Mechanical properties

Bending radius: 8 x diameter
Operating temperature: -20 °C to +60 °C
Installation temperature: 0 °C to +50 °C

Application areas

Network standards: IEEE 802.3 (10Base-T, 100Base-T, 1000Base-T, 10GBase-T, 25GBase-T, 40GBase-T)
Other protocols: IEEE 802.5, ISDN, FDDI, ATM, PoE/PoE+
Usage: Indoor – Structured building cabling

Fire safety and environmental standards