The high-quality network or installation cable is used for setting up high-speed Gigabit Ethernet networks. Such a cable can support speeds of up to 10 Gbps. It is also backward compatible with CAT.7, CAT.6a, CAT.6, CAT.5e and CAT.5 categories.
Range of use: compatible with IEEE 802.3, WLAN network, 10/100/1000Base-T, 10GBase-T, PoE, PoE+, PoE++
Installation options: optimised for high transmission speeds of up to 10 Gigabit/s and numerous application options in private and industrial areas
Technical data:
- Cable category: CAT 7a
- Inner conductor material: pure copper (4x2 cores)
- Inner conductor diameter: Ø 0.574mm AWG23
- Conductor construction: twisted pair, 4 wire pairs
- Pair colours: green + white; brown + white; orange + white; blue + white
- *the second cable in the pair is plain white - this is typical for all installation cables
- Shielding: S/FTP PiMF (double shielded): Aluminium foil with plastic sheathing (pair) 100% coverage > Shielding braiding of aluminium wires 25% coverage
- Outer sheath diameter: Ø 7.7 mm
- Outer sheath material: LSZH Halogen-free
- Fire protection class BauPVO: Cca s1a d1 a1 (EN 50575:2014)
Temperature range:
- Installation -20°C ... +60°C
- in operation 0°C ... +50°C
- Storage -15°C ... +50°C
Bending radius:
- during installation min. 4 x D
- when installed min. 8 x D
- Transmission rates: up to 10 Gbit/s 10000MBit/s
- Data frequency rate: Designed up to max. 1200 MHz
- Impedance: @100MHz - 100 ±5Ω Ohm
- Coupling attenuation: 85 dB
- Operating voltage: 125 V
- Crush resistance: min. 1000 N/10cm
- DC resistance: max. 73 Ohm/km
- Resistance unbalance: max. 2%
- Insulation resistance: min. 5000MΩ x km
- Mutual capacitance: nom. 42 pF/m
- Capacitance unbalance: max. 1600 pF/km
- Propagation delay: max. 450 ns/100m
- Delay skew: max. 25 ns/100m
- Testing voltage: 1000 V
- NVP value: 78-80%
Connection:
- Connection A: Network raw cable (without plug)
- Connection B: Network raw cable (without plug)
*The matching connector can be ordered separately from us
Standards:
- ISO IEC 11801-1 2nd ed
- ISO IEC 61156-5
- EN 50173
- EN 50173-1
- EN 50290-2-23
- EN 50290-2-27
- EN 50575:2014
- LVD Low Voltage Directive 2014/35/EC
- RoHS EC Directive 2015/863/EU
Scope of delivery:
- 1 x 25m network cable CAT 7a yellow (RAL 1016)
The high-quality network or installation cable is used for setting up high-speed Gigabit Ethernet networks. Such a cable can support speeds of up to 10 Gbps. It is also backward compatible with CAT.7, CAT.6a, CAT.6, CAT.5e and CAT.5 categories.
Range of use: compatible with IEEE 802.3, WLAN network, 10/100/1000Base-T, 10GBase-T, PoE, PoE+, PoE++
Installation options: optimised for high transmission speeds of up to 10 Gigabit/s and numerous application options in private and industrial areas
Technical data:
- Cable category: CAT 7a
- Inner conductor material: pure copper (4x2 cores)
- Inner conductor diameter: Ø 0.574mm AWG23
- Conductor construction: twisted pair, 4 wire pairs
- Pair colours: green + white; brown + white; orange + white; blue + white
- *the second cable in the pair is plain white - this is typical for all installation cables
- Shielding: S/FTP PiMF (double shielded): Aluminium foil with plastic sheathing (pair) 100% coverage > Shielding braiding of aluminium wires 25% coverage
- Outer sheath diameter: Ø 7.7 mm
- Outer sheath material: LSZH Halogen-free
- Fire protection class BauPVO: Cca s1a d1 a1 (EN 50575:2014)
Temperature range:
- Installation -20°C ... +60°C
- in operation 0°C ... +50°C
- Storage -15°C ... +50°C
Bending radius:
- during installation min. 4 x D
- when installed min. 8 x D
- Transmission rates: up to 10 Gbit/s 10000MBit/s
- Data frequency rate: Designed up to max. 1200 MHz
- Impedance: @100MHz - 100 ±5Ω Ohm
- Coupling attenuation: 85 dB
- Operating voltage: 125 V
- Crush resistance: min. 1000 N/10cm
- DC resistance: max. 73 Ohm/km
- Resistance unbalance: max. 2%
- Insulation resistance: min. 5000MΩ x km
- Mutual capacitance: nom. 42 pF/m
- Capacitance unbalance: max. 1600 pF/km
- Propagation delay: max. 450 ns/100m
- Delay skew: max. 25 ns/100m
- Testing voltage: 1000 V
- NVP value: 78-80%
Connection:
- Connection A: Network raw cable (without plug)
- Connection B: Network raw cable (without plug)
*The matching connector can be ordered separately from us
Standards:
- ISO IEC 11801-1 2nd ed
- ISO IEC 61156-5
- EN 50173
- EN 50173-1
- EN 50290-2-23
- EN 50290-2-27
- EN 50575:2014
- LVD Low Voltage Directive 2014/35/EC
- RoHS EC Directive 2015/863/EU
Scope of delivery:
- 1 x 25m network cable CAT 7a yellow (RAL 1016)