Description
The VENTON-BL-O Octo LNB is suitable for the reception of analogue and digital channels (also HDTV and Premiere) from any satellite. Eight analogue or digital receivers, also mixed, can be connected directly without additional components. No further components or switches are required!
The LNB can be connected via DiSEqC switches for multi-feed reception of several satellites. The LNB is characterised by a minimum and stable noise figure of 0.1dB, excellent workmanship and a UV-resistant weatherproof housing with a precisely fitting clip-on weather protection cap.
Technical data:
- HDTV suitable
- 0.1dB noise figure
- for 8 participants
- reception of 1 satellite
- integrated DiSEqC switch
- Low Band:
- Input frequency range 10.7 - 11.70 GHz
- output frequency range: 950 - 1950 MHz
- LO frequency: 9.75 GHz
- High Band:
- Input frequency range: 11.70 - 12.75 GHz
- Output frequency range: 1100 - 2150 MHz
- LO frequency: 10.6 GHz
- conversion gain (room temperature): 50 dB(min.) / 60 dB(max.)
- Gain over frequency response: ±0.7 dB / 26 MHz
- Gain variation: 7 dB / full band
- Local oscillator stability: ±1.0 MHz (max.) +25 °C
- ±3.0 MHz (max.) -30 °C ~ +60 °C
- Local oscillator Phase noise: -50 dBc / Hz 1 KHz
- -75 dBc / Hz 10 KHz
- -90 dBc / Hz 100 KHz
- mirror frequency rejection: 40 dB (min.)
- Cross Pol. Isolation: 25 dB (typ.)
- voltage standing wave ratio: 2.5 : 1 (max.)
- current consumption: 200 mA (max.)
- Voltage: 11.5 ~ 19.0 V
- Band switching: Low Band: 0 kHZ
- High Band: 22 kHZ ± 4 kHz
- Operating temperature: -30'C to +60'C
- Input feedhorn type: Linear
- C120 optimised offset mirror
- F / D ratio from 0.45 to 0.70
- Output: 75 Ohm F connector (female)
- Switching with 13V / 18V and 0/22 kHz
- heat and cold resistant
- low power consumption
- weight: 227 g
Scope of delivery:
- 1x Venton BL-O OCTO LNB BLU Series
Payment methods
Payment methods
Shipping methods
Shipping methods
