The Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can withstand strong winds and heavy rain without any problems and offers excellent satellite reception with a unique bad weather reserve due to its very good quality.
The reflector diameter is 78 centimetres and the support arm is equipped with a special LNB bracket made of robust cast aluminium. All cables can be laid protected by the feed lever. A mounting compartment is built into the back of the SAT antenna, which can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
- Reflector diameter: 740 x 840 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 36.80 dB...38.50 dB
- Half-width at 12.75 GHz: < 2.2
- Cross-polarisation decoupling: ≥ 27 dB
- Offset angle: 25°
- Wind load at max. 20 m/s: 17.4 kg
- Wind load at max. 40 m/s: 69.4 kg
- Wind load at max. 60 m/s: 156.2 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: Aluminium
- Reflector material thickness: 1.0 mm
- Antenna back: Galvanised steel with plastic connections
- Screw sets: Stainless steel
- Colour of back: grey, independent of reflector colour
- Feed mount: 40 mm
- LNB holder: die-cast aluminium
The hb-digital UHD 101 S Single Low Noise Signal Converter is suitable for the reception of analogue as well as digital channels (also HDTV and Premiere) from any satellite.
1 analogue or digital receiver, also mixed, can be connected directly without any further components.
No further components or switches are required!
The LNB can be connected via DiSEqC switches for multi-feed reception of several satellites.
The LNB features a minimal and stable noise figure of 0.1dB, excellent workmanship.
Technical data:
- Model: hb-digital UHD 101 S Single Black
- Noise figure: only 0.1 dB
- Horizontal and vertical polarisation (linear)
- 40 mm feed diameter
- Input frequencies: in the range 10.7 - 12.75 GHz
- 100 % waterproof
- Output frequency range(MHz):950-2150
- Oscillator low/high band(GHz):9.75/10.60
- Oscillator stability(MHz):±3
- Gain(dB):Min.57
- Impedance output(Ω):75
- Switching V/H/Hi/Lo:13/18 VDC/0-22KHz
- Current consumption (mA):Max.240
- Number of outputs:1
- Connectors: F gold plated
Scope of delivery:
- 1 x Satellite dish Fuba DAA 780 - 78cm brick red
- 1 x Arm
- 1 x LNB bracket
- 1 x LNB Single
- 2 x F-connector
* The pictured mounting tube is not included in the scope of delivery
The Fuba DAA series is a powerful satellite dish for perfect TV reception. The robust SAT dish can withstand strong winds and heavy rain without any problems and offers excellent satellite reception with a unique bad weather reserve due to its very good quality.
The reflector diameter is 78 centimetres and the support arm is equipped with a special LNB bracket made of robust cast aluminium. All cables can be laid protected by the feed lever. A mounting compartment is built into the back of the SAT antenna, which can accommodate up to 4 DiSEqC relays or band switches.
The entire signal distribution from 2 satellite positions to up to 4 connections can thus be accommodated directly in the antenna. For easier and faster installation, the mast mount and back section are pre-assembled at the factory.
Technical data:
- Reflector diameter: 740 x 840 mm
- Frequency range: 10.75 GHz...12.75 GHz
- Gain: 36.80 dB...38.50 dB
- Half-width at 12.75 GHz: < 2.2
- Cross-polarisation decoupling: ≥ 27 dB
- Offset angle: 25°
- Wind load at max. 20 m/s: 17.4 kg
- Wind load at max. 40 m/s: 69.4 kg
- Wind load at max. 60 m/s: 156.2 kg
- Elevation adjustment: 0°...90° (0°...42° for foremast mounting)
- Clamping range of mast clamp: 26...75 mm
- Reflector material: Aluminium
- Reflector material thickness: 1.0 mm
- Antenna back: Galvanised steel with plastic connections
- Screw sets: Stainless steel
- Colour of back: grey, independent of reflector colour
- Feed mount: 40 mm
- LNB holder: die-cast aluminium
The hb-digital UHD 101 S Single Low Noise Signal Converter is suitable for the reception of analogue as well as digital channels (also HDTV and Premiere) from any satellite.
1 analogue or digital receiver, also mixed, can be connected directly without any further components.
No further components or switches are required!
The LNB can be connected via DiSEqC switches for multi-feed reception of several satellites.
The LNB features a minimal and stable noise figure of 0.1dB, excellent workmanship.
Technical data:
- Model: hb-digital UHD 101 S Single Black
- Noise figure: only 0.1 dB
- Horizontal and vertical polarisation (linear)
- 40 mm feed diameter
- Input frequencies: in the range 10.7 - 12.75 GHz
- 100 % waterproof
- Output frequency range(MHz):950-2150
- Oscillator low/high band(GHz):9.75/10.60
- Oscillator stability(MHz):±3
- Gain(dB):Min.57
- Impedance output(Ω):75
- Switching V/H/Hi/Lo:13/18 VDC/0-22KHz
- Current consumption (mA):Max.240
- Number of outputs:1
- Connectors: F gold plated
Scope of delivery:
- 1 x Satellite dish Fuba DAA 780 - 78cm brick red
- 1 x Arm
- 1 x LNB bracket
- 1 x LNB Single
- 2 x F-connector
* The pictured mounting tube is not included in the scope of delivery